Beverage Packaging

Husky is the leader in PET preform manufacturing equipment

    • Husky’s PET preform systems are the world's most productive, delivering fast cycles, high uptimes and low scrap rates

    • husky-pet-system
      HyPET system

      HyPET® is an integrated injection molding system where all components, including machine, mold, hot runner, robot, post-mold cooling and auxiliaries, are specifically designed to work together as a fully integrated and optimized workcell. This integrated approach makes it possible to achieve the highest levels of overall equipment efficiency (OEE). HyPET delivers high quality preforms, fast cycles, reliable performance, low scrap rates and also features several system refinements that enable improved energy efficiency and reduced maintenance.

      Husky’s intelligent Mold ID integrates the machine, cold half, hot runner and post-mold cooling for optimized system parameters like tonnage and injection profile. Mold ID sets operating parameters for each tool and allows for porting of that optimized process from machine to machine. This results in correct start-up and operating procedures, eliminating potential human error.

      HyPET systems deliver:
      • Reduced variability and increased part quality
      • Lowest energy consumption in its class
      • Polaris™ Control provides an intuitive operator experience, reducing operator training and providing rich process monitoring data
      • Fully integrated workcells to get up and running faster and keep running more efficiently
       
    • HyPET High Performance Package (HPP) takes productivity to a higher level

      Should you require even more output from a HyPET system, we offer the High Performance Package (HPP), which provides up to 20% faster cycle times. HPP is the result of advancements to every area of the preform molding system, including hot runner, mold, robot, injection unit, clamp and auxiliary equipment.

      HyPET HPP systems deliver:
      • High capacity that is proven and reliable
      • Reduced variability and increased part quality
      • Preform lightweighting by enabling thinner-wall sections
      • Resin savings on every shot consistently for the life of the system
      • Lowest energy consumption per part produced
      • Integrated system that is easy to operate and get up and running faster
      • Compatibility with your existing Husky molds

      The productivity improvements offered with HyPET HPP further reduce the cost of PET packaging. Optimization of the melt stream from pellet to part results in higher preform quality and a significantly improved ability to mold thinwall preforms. This helps to reduce the cost of PET as a packaging material and enable the expansion of PET into new market segments.

      husky-hypet-system-hpp
    • Barrier module for HyPET HPP5

      Already the leading supplier of equipment and services to the global PET preform manufacturing industry, Husky has developed an industry-leading barrier solution, built as a module available with HyPET® HPP5. Enabled by new barrier technology, the high performance multi-layer module makes HyPET® HPP5 the industry’s most capable injection molding system, delivering precise amounts of barrier material to reach the target shelf life. Our barrier technology offers manufacturers new possibilities to explore PET as a packaging material for beverages, providing opportunities for significant cost savings that were previously unreachable for applications requiring a barrier.

      Our barrier solution delivers:
      • Highest ever system capability and the ability to produce parts with low barrier content – Husky can produce multi-layer preforms at 2.5% and 1% barrier, saving you up to 50% on barrier material costs
      • Increased capability to precisely dose and distribute barrier material – Husky can produce a range of only 0.5%, compared to the current industry average of 1.5%
      • Advanced melt delivery system with our Stratus hot runner – delivers unrivaled balance with only two melt splits
      • Flexibility – compatibility with mono-layer and multi-layer tooling, ensuring full utilization of existing assets
       
      Barrier module for HyPET HPP5  
    • husky-hypet-recycled-flake
      HyPET Recycled Flake (RF) system

      Husky’s HyPET Recycled Flake (RF) system is specifically designed for manufacturing preforms with high percentages of food-grade recycled PET flake, with no compromise in cycle times or throughputs. The end result is a molding platform that can lower the cost and environmental impact of PET as a packaging material without sacrificing system performance or compromising part quality.

      HyPET RF systems deliver:
      • Reduced variability and increased part quality
      • Lowest energy consumption per part produced
      • Easy operation though Polaris Control
      • Fully integrated workcells to get up and running faster and keep running more efficiently
       
    • H-PET All-Electric (AE) system

      Husky’s H-PET™ All-Electric (AE) system is an efficient solution for lower volume preform production that offers unbeatable affordability with absolutely no compromise in quality. Our H-PET AE™ system is available in a range of configurations to match lower volume output and application needs. These combined benefits allow H-PET AE to provide the best return on investment and the lowest investment risk if you are entering into or expanding your presence in the PET preform market.

      H-PET AE systems deliver:
      • Proven, reliable design and technology
      • An efficient, quiet, low maintenance solution that is easy to use
      • Up to three stages of post-mold cooling
      • Optimized standard auxiliary package and complete workcell infrastructure
      • Full integration through Polaris Control
       
      husky-hpetae-all-electric-pet-system